|
|
NEW
Ultimate quality Silicone Marine Exhaust & Water hose. #202V
Blue Very Hi Temp. [4 to 6 ply polyester reinforcement 350°F
(177°C)] & #202X Red Xtra Hi Temp [4 ply Nomex® reinforcement
500°F (260°C)] dramatically exceeds all standards and lasts up
to 6 times longer than black rubber. (SAE J2006, ABYC and NMMA)
Stds.** (see below).
See Marine Wet Exhaust Systems Catalog. ISO 13363 Std. Pending.
10 YEAR WARRANTY
|
1" to 18"
25 to 457mm |
Blue or Red w/ White Stripe
|
I.D.: 1" (25mm) to 8-5/8" (219mm)
Lengths: 6' (1.8m) & 12' (3.65m)
ALL: 3' (0.91m) |
|
|
|
|
Premium corrugated marine wet exhaust
hose for longer connections with substantial bends. Thick tube
and cover with helix between 2 ply reinforcement. Exceptional
flexibility and bend radius. Resists heat, ozone, exhaust fumes,
panting and collapse. Exceeds New (SAE J2006, ABYC and
NMMA) Stds.** (see below). Black High
Temp EDPM Rubber 250°F (121°C). ISO 13363 Std. Pending.
5 YEAR WARRANTY |
1-1/2" to 10"
38 to 254mm |
Black w/ Blue Stripe |
I.D.: 1" (25mm) to 4" (102mm)
Coils: 50' (15m)
Lengths: 12.5' (3.8m) & 6.5' (1.9m) |
|
|
|
|
Premium wet exhaust hose for longer bent
connections. In smaller I.D.'s for engine intake, critical
water, drain, scupper bilge & sanitation uses. Extra heavy tube
and cover with helix between 2 ply reinforcement provides
excellent flexibility and bend radius. Resists heat, ozone,
exhaust, sani chemicals, panting and collapse. Exceeds New
(SAE J2006, ABYC and NMMA) Stds.** (see
below). Black High Temp EDPM Rubber 250°F (121°C). ISO 13363
Std. Pending.
5 YEAR WARRANTY |
1/2" to 10"
13mm to 254mm |
Black w/ Blue Stripe |
I.D.: 1/2" (13mm) to 4" (102mm)
Coils: 50' (15m)
Lengths: 12.5' (3.8m) & 6.5' (1.9m) |
|
|
|
|
Premium marine wet exhaust hose for
short, straight connections. In smaller I.D.'s for critical
engine coolant & circulation, heat exchanger and discharge uses.
Extra heavy tube and cover with 2 to 6 ply reinforcement resists
heat, aging, ozone, exhaust and sani chemicals. Exceeds New
(SAE J2006, ABYC and NMMA) Stds.** (see
below). Black High Temp EDPM Rubber 250°F (121°C). ISO 13363
Std. Pending.
5 YEAR WARRANTY |
1/2" to 10"
13mm to 254mm |
Black w/ Blue Stripe |
I.D.: 1/2" (13mm) to 2.5" (63.5mm)
Coils: 50' (15m)
Lengths: 12.5' (3.8m) & 6.5' (1.9m) |
|
|
|
|
131V Ultimate Silicone Heater Hose- Very
Hi Temp Blue with Red Tube provides much greater temperature
range and service life (up to 6 times longer) than standard EDPM
rubber #130 Heater Hose. Both are 2 spiral polyester reinforced
with similiar working pressure for engine coolant water, A/C and
other mid-pressure water applications. #131V (VHT-Blue):
45 to 75PSI (0.31 to 0.52Mpa) WP 350°F (177°C) SAE J20R3, Class
1 & J20P3. 7 Year Warranty.
#130 (Standard Black): 50PSI (0.34Mpa) WP 212°F (100°C)
SAE J20R3. 2 Year Warranty. |
Blue(131V):
1/4" to 1"
6.3 to 25mm
Black(130):
1/2" to 3/4"
13 to 19mm |
Blue Cover w/ Red Tube
Black w/ Yellow Letters |
Blue(131V):
300' (90m) to 175' (53m) Coils
50' (15m) to 25' (7.6m) Boxes
Black(130):
500' (150m) - 450' (140m) Reels
50' (15m) Boxed |
|
|
|
|
Cost effective, Hi Temp, EPDM rubber,
polyester reinforced and exceeds SAE J20R3. Both are resistant
to coolants, ozone, cold & heat; and serve a variety of boat and
plant pressurized applications (water & air delivery).
#132: 2 spiral, 200PSI (1.38Mpa) WP.
#134: 4 spiral, heavy wall and better bend radius and
working pressure - 300PSI (2.1Mpa) WP. Operating temperature
-40° to 212°F (-40° to 100°C). #134 serves below water line
intake and discharge applications (A/C, Eng, Sani) etc.
2-3 YEAR WARRANTY |
1/4" to 1"
6.3mm to 25mm |
Black w/ White Letters |
Reels: 750' (230m) to 250' (75m)
Boxed: 50' (15m) |
|
|
**Wet exhaust hose connections: recommend double
clamping with stainless steel T-bolt or Constant-Torque
clamps. Nomex® is a trademark of e.i
DuPont.
|
|
