Technical details about 200-005	Back
Tri-color light for sailing yachts between 12 - 20 meters (39,4 - 65,6 feet)
LED (Light Emitting Diode) navigation light. Unique and precise definition of light angles. World wide type approval to comply with COLREG 72/EN 14744/UL 1104 Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED’s and electronics. Completely waterproof and vibration proof: Interior is fully filled and sealed with special potting resin. Waterproof to IP 68+ (submersible). Lifetime over 50.000 hours or 4.200 nights. Low power consumption – 70 to 90% less than traditional navigation lights Full brightness with input voltages ranging from 10 to 32 Volts. All Lopolights have been tested during production, concluding with a 24 hour burn-in test. Easy to install, adaptor and screws included (when applicable).   Data Sheet Installation Guide PDF drawing DWG drawing DXF drawing
Approvals MCA (UK), QQ-TAN-03/05-01R USCG (USA), approved 09-2005 under 111.075 by recognized laboratory QinetiQ DMA (DK), 199942520 RINA (Italy), ELE054806CS BSH (Ger) pending Included in package 1 Navigation light 1 Mounting block with pre-threaded holes 2 Terminal screws and washers (3 * 8 mm) 3 Mounting screws (4 * 30 mm) Installation guide Measurements Light: Ø: 92,5 mm (3,64 in) – H: 44,0 mm (1,73 in) – W: 520 gram (18 oz) Mounting block: Ø: 92,5 mm (3,64 in) – H: 24,0 mm (1,14 in) – W: 148 gram (5 oz) Materials Anodised aluminum 25µ, PMMA lens, A4 stainless steel screws, Epoxy, Polyurethane. Supply voltage 10-32 VDC Power consumption 6,1 Watt; Current @ 12 VDC: 0,5 A: Current @ 24 VDC: 0,25 A Light colors Green – Red – White Intensity >5,4 cd Visibility (@K=0.8) 2 nm Number of LED's 87 Suggested feed cables 12 VDC: 2 x 0,25 mm2 (maximum outer diameter 7mm) 24 VDC: 2 x 0,25 mm2 (maximum outer diameter 7mm) Expected life 50.000 Ship size 12 - 20 meter (39,4 - 65,6 feet) Mounting Horizontal
Back

Specifications may be subject to change