Technical details about 100-004 Back
Combined sidelight 1 nm for vessels 0-12 meter (39,4 feet). Vertical mounting

  • LED (Light Emitting Diode) navigation light.
  • Unique and precise definition of light angles.
  • World wide type approval to comply with COLREG 72/EN 14744/UL 1104
  • Rugged and unbreakable: Precision machined anodised aluminium or carbon fibre housing protects the LED’s and electronics.
  • Completely waterproof and vibration proof: Interior is fully filled and sealed with special potting resin.
  • Waterproof to IP 68+ (submersible).
  • Lifetime over 50.000 hours or 4.200 nights.
  • Low power consumption – 70 to 90% less than traditional navigation lights
  • Full brightness with input voltages ranging from 10 to 32 Volts.
  • All Lopolights have been tested during production, concluding with a 24 hour burn-in test.
  • Easy to install, adaptor and screws included (when applicable).

 


Approvals MCA (UK), QQ-TAN-03/05-01R
USCG (USA), approved 09-2006 under 111.075 by recognized laboratory QinetiQ
DMA (DK), 199942520
RINA (Italy), ELE054806CS
BSH (Ger) pending
Included in package 1 Navigation light
2 Terminal screws and washers (3 * 8 mm)
2 Mounting screws (M6 * 8 mm)
Installation guide
Measurements 92,5 mm (3,64 in) - 75 mm (2,95 in) – 29,0 mm (1,14 in) – W: 230 gram (8,2 oz)
Materials Anodised aluminum 25µ, PMMA lens, A4 stainless steel screws, Epoxy, Polyurethane.
Supply voltage 10-32 VDC
Power consumption 2,4 Watt
Current @ 12 VDC: 0,2 A: Current @ 24 VDC: 0,1 A
Light colors Green & Red
Intensity >1,2 cd
Visibility (@K=0.8) 1 nm
Number of LED's 36
Suggested feed cables 12 VDC: 2 x 0,25 mm2 (maximum outer diameter 7mm)
24 VDC: 2 x 0,25 mm2 (maximum outer diameter 7mm)
Expected life 50.000
Ship size 12 meter (39,4 feet)
Mounting Vertical
Back

 

Specifications may be subject to change