Jefa tiller levers

Tiller levers for rack and pinion steering and autopilot drives

The Jefa tiller levers are not casted but made from high strength aluminium AlMgSi1. As a tiller lever has to endure high impact loadings from for instance rudder stops, the material should not be easy breakable like cast aluminium. The Jefa tiller levers are available in three boss sizes depending on the rudder stock diameter. All Jefa tiller levers are standard equipped with an autopilot pick up hole at 250 mm centres and tap holes for the rudder feedback unit.
Please click on the picture for a larger view.

Jefa Tiller Levers
Part No.	Description
TLJ050	Tiller lever L=255 mm, max. bore 50 mm
TLJ075	Tiller lever L=255 mm, max. bore 75 mm
TLJ100	Tiller lever L=255 mm, max. bore 100 mm
TLJ125	Tiller lever L=255 mm, max. bore 125 mm
TLH125	Tiller lever L=335 mm, max. bore 125 mm
TLH200	Tiller lever L=335 mm, max. bore 200 mm
TLJBORE	Bore and key tiller lever
TLJPIN16	16 mm tiller lever pin
TLJPIN22	22 mm tiller lever pin
TLJPIN58	5/8" mm tiller lever pin for other steering systems
TLAUTO	surcharge for additional autopilot arm connected to tiller cap

Jefa tiller lever dimensions

Jefa Tiller Dimensions
Part No.	Max. diam. D	ØB	Ha	Hb	Hc
TLJ050	50	90	20	5	60
TLJ075	75	110	20	5	60
TLJ100	100	140	20	5	60
TLJ125	125	170	20	5	60

Jefa Tiller Levers