|
Intro Standard series offers a 30, 60, and 90 litres per
hour range of fresh water produced.
Fully automatic system with all processes, production,
stop and flush controlled from a convenient control panel equipped with
only 3 buttons. This simple but complete element, in addition to
the self regulating pressure feature in all the ECO-SISTEMS WATERMAKERS
S.L. watermakers, makes manipulating the system almost unnecessary
- only occasional manipulation for maintenance is necessary.
The electronic control panel is equipped with a speed
pump power regulator, that allows the fresh water production to be
adjusted to suit any temperature and salinity levels of the sea.
Optionally, the system can be equipped with a remote
control panel to be installed in the cockpit of the boat.
The Fresh Water Flush system replaces the seawater
inside the piping system with fresh clean water, and leaves the system
ready for its next use. It is triggered by pressing the "Wash" button at
the end of the fresh water production, and it stops automatically after
the end of the flushing, keeping it free of biological waste and marine
microorganisms.
Extremely simple, reliable and easy to use.
It works at a constant volume, with automatic high
pressure which is regulated by the membrane.
Description S-30 12/24v DC Model
Designed to meet basic fresh water
needs without renouncing the ease and convenience offered by the
Standard series features.
Fully automatic system, with all processes,
production, stop and flush controlled from a convenient control
panel equipped with only 3 buttons. This element makes manipulating
the system almost unnecessary.
Watermaker with a 30 litres per hour fresh water
production.
Especially suitable for boats with less than 12
meters in length and up to 150 litre capacity water tanks.
• Automatic high pressure regulation.
• Fully manual, no electronic elements installed.
• Fresh Water Flush system included with carbon
filter and solenoid valve automatically operated.
• The highest quality fresh water on the spot.
• Available in 12 and 24v DC versions.
Very easy to install, operate and maintain.
Scheme
Dimensions & Weight
| Elements |
Peso |
| ST-08 ECO-SISTEMS PUMP (ETD) |
13 KG |
| MEMBRANE VESSEL |
4KG |
| FEED PUMP AND MOTOR SET |
7KG |
| SEA STRAINER SET |
1.5KG |
| LOW PRESSURE FILTER |
1.5KG |
| CARBON FILTER |
1.2KG |
| HYDRAULIC CONTROL PANEL |
0.8KG |
| ELECTRONIC CONTROL PANEL |
0.5KG |
| POWER BOX |
0.5KG |
Specifications
|
Electrical Specifications
- 200w motor in voltage of 12v DC power
consumption: 16 Amp, 192w *
- 300w motor in voltage of 24v DC power consumption: 8 Amp,
192w*
- Average consumption per litre: 6.4w*
The consumptions are estimates and may have slight
variations depending on water temperature, salinity and
conditions of system installation.
Other Specifications
- Minimum inlet pressure to the pump power
bar +0.05
- Output pressure feed pump 10 to 13 bar
- Output pressure of the high pressure
pump 55 to 65 bar
- Conversion Ratio: 6.84: 1
- Inflow (Feed Flow): 250 litres
- Average production effective: 30 litres
/ hour (+ / - 10%)
- Conversion: 11.83%
- Type of Membrane: FR-80-25/21-SPECIAL
|
Packing List
|
