Description
Integral series is the simplest and smallest watermaker offered by ECO-SISTEMS WATERMAKERS S.L., designed to meet
basic fresh water needs on board. Especially suitable for small power
and sail boats.Equipped with the new E-200 INTEGRA Energy Transfer
Device, with the ETD and the reverse osmosis membrane integrated in one
single element thus avoiding the installation of high pressure pipes.
• Rated production: 30 liters / hour.
• Both automatic and manual versions are available.
• Automatic pressure regulation.
• Also available in 12 and 24v DC versions.
• Reliable, simple and very easy to use and install.
Even by users!
Scheme
Dimensions & Weight
| Elements |
weigth |
| 50/16 INTEGRA ECO-SISTEMS PUMP (ETD) |
14KG |
| FEED PUMP AND MOTOR SET |
7KG |
| SEA STRAINER SET |
1.2KG |
| LOW PRESSURE FILTER |
1KG |
| CARBON FILTER |
1.2KG |
| HYDRAULIC CONTROL PANEL |
0.8KG |
Specifications
Electrical Specifications:
- 200w motor with 12v DC voltage power
consumption: 16 Amp, 192w *
- 300w motor with 24v DC voltage power consumption: 8 Amp, 192w*
- Average power consumption per liter: 6.4w*
* The consumptions are estimates and may have slight variations
depending on water temperature, salinity and conditions of system
installation.
Other Specifications:
- Minimum inlet pressure to the feed pump: +0.05 bar
- Output feed pump pressure: 10 - 12.5 bar
- Output ETD pressure: 55 to 65 bar
- Conversion ratio: 8.76: 1
- Inlet feed flow: 293 liters / hour
- Average production: 30 liters / hour (+ / - 10%)
- Conversion: 10.23%
- Type of Membrane: FR-80-25/26-HF-SPECIAL
Packing List
|
