Our Shark™ anchors are exceptionally
effective in a variety of sea beds. Work
very well with Anchorlift bow rollers, which
give you a self launching system. Release
the anchor without the need to leave the
controls. Remains stable in various tidal
conditions. Available in hot dipped
galvanized and in high polished stainless
steel (ASI316). Sizes from 6 kg / 13 lbs to
50 kgs / 110 lbs. According to our testing,
the Shark™ anchors holds up to 35% more
weight than our competitor's counterpart,
the Bruce anchor.
|
|
|
Stainless Steel Models |
Weight |
Boat
Size |
| RSA6 |
6 kgs / 13,2 lbs |
up to 25
feet |
| RSA8 |
8
kgs / 17,6 lbs |
up to 30 feet |
| RSA10 |
10
kgs / 22 lbs |
up to 40 feet |
| RSA15 |
15
kgs / 33 lbs |
up to 45 feet |
| RSA20 |
20
kgs / 44 lbs |
up to 55 feet |
| RSA30 |
30
kgs / 66 lbs |
up to 65 feet |
|
|
|
|
 |
|
|
Stainless Steel Models |
Weight |
Boat Size |
| SA6 |
6 kgs / 13,2 lbs |
up to 22 feet |
|
SA8
|
8 kgs / 17,6 lbs |
up to 28 feet |
|
SA10 |
10 kgs / 22 lbs |
up to 35 feet |
|
SA15 |
15 kgs / 33 lbs |
up to 40 feet |
|
SA20 |
20 kgs / 44 lbs |
up to 50 feet |
|
SA30 |
30 kgs / 66 lbs |
up to 60 feet |
|
SA50
|
50 kgs / 110 lbs |
up to
75 feet |
|
|
|
Test Shark Anchor vs Bruce type anchor .pdf
file
Our Holding™ anchor is based
on the famous Bruce anchor, which was originally
made for oil riggs in the North Sea. Sets fast
and secure to almost any bottom conditions.
Made in one piece. Available in hot dipped
galvanized steel and stainless steel (AISI316).
|
|
|
Stainless Steel Models |
Weight |
Boat
Size |
| RMA5 |
5 kgs / 11 lbs |
up to 22
feet |
|
RMA75
|
7.5 kgs / 16.5 lbs |
up to 28 feet |
| RMA10 |
10
kgs / 22 lbs |
up to 35 feet |
| RMA15 |
15
kgs / 33 lbs |
up to 40 feet |
| RMA20 |
20
kgs / 44 lbs |
up to 50 feet |
| RMA30 |
30
kgs / 66 lbs |
up to 60 feet |
|
RMA50
Special order only
|
50
kgs / 110 lbs |
up to 75 feet |
|
|
|
|
 |
|
|
Galvanized Models |
Weight |
Boat
Size |
| MA5 |
5 kgs / 11 lbs |
up to 22
feet |
|
MA75
|
7.5 kgs / 16.5 lbs |
up to 28 feet |
| MA10 |
10
kgs / 22 lbs |
up to 35 feet |
| MA15 |
15
kgs / 33 lbs |
up to 40 feet |
| MA20 |
20
kgs / 44 lbs |
up to 50 feet |
| MA30 |
30
kgs / 66 lbs |
up to 60 feet |
| MA50 |
50
kgs / 110 lbs |
up to 75 feet |
|
MA80
Special order only
|
80
kgs / 176 lbs |
up to 85 feet |
|
|
|
|
Anchor Connectors (with swivel)
Stainless steel (AISI316)
anchor connectors with swivel. With an anchor
connector swivel attached to the anchor it is
impossible for the chain to get twisted. The
oval shaped joint allows perfect sliding of the
anchor through the roller with no risk of
damaging any components. Fits the Shark, Delta,
Bruce and Holding anchors up to 80 kgs/176 lbs.
 |
|
| Model
Number |
Breaking
Load |
Chain
size |
| 964408 |
2,500 kgs / 5,500 lbs |
6-7
mm (1/4") |
| 964410 |
5,000 kgs / 12,500 lbs |
8-10 mm (5/16"-3/8") |
| 964412 |
7,000 kgs / 15,400 lbs |
10-13 mm (3/8"-1/2") |
|
|
